WS824 WS848-5D Manual Download

Page: 5 / 72

[Multi levels of extension]

Multiple levels of extension that can only call peers or low-level users. Prevent

internal harassment calls, improve office efficiency, and room satisfaction rate.

[IP numbers]

Support local, domestic and international IP Numbers, support local IP filtering.

Each exterior line can be independently set up three groups of IP, different types of

traffic plus dialing different IP number, saving call costs.

[Multi-song of waiting music]

The system built-in multi-song of waiting music, up to 36 songs, volume

adjustable, switchable multiple songs.

[Voice navigation Multimode process]

Support normal voice navigation, IVR single key navigation mode, night service

voice navigation.

[Self-recording voice Multi-channel Over-length]

This series supports 1-4 channels of voice, and each channel provides 3 segments

of self-recording voice, which are 120 seconds for day self-recording voice, 80

seconds for night self-recording voice, and 60 seconds for alarm self-recording voice.

Multi-channel voice, effectively shorten the response time of multi-channel

exterior line simultaneous incoming call. The more channels, the faster the response.

Over-length self-recording voice, especially suitable for Chinese and English

bilingual scenes. Support 3.5mm ACR interface to import voice, providing higher

definition and more comfortable sound perception experience. Programmable switch

between self-recording and preset voice, preset voice will not be lost, no worries about

operation.

[Voice protection Complete promotion]

The outside caller must listen to the whole voice, then can dial numbers.

Optimize the publicity effect.

[Night mode]

When night mode is working, exterior incoming calls can directly call the

extension on duty, or listen to the night voice. This function can highlight the

corporate image.

WEB:WWW.WS824.ORG TEL:020-85261379 18144823824

Summary of Contents for WS848-5D









































































Search results

Summary of Contents for WS848-5D

Reviews:

Related manuals for WS848-5D

Brands by name

Popular brands

WS824 WS848-5D, Manual

Search results

Summary of Contents for WS848-5D

Reviews:

Related manuals for WS848-5D

Brands by name

Popular brands