WS824 WS848-5D Manual Download Page 59

Page: 59 / 72

7.5 Broadcast the number of secondary dialing

When the caller dials extension number correctly, it will broadcast the dialed

number before the transfer prompt voice. This function is default enabled.

7.6 Prompt voice protection

When protection is on, the caller cannot dial any key, until the prompt voice is

played over. The caller can hear dialing tone when the prompt voice is over, and then

he/she can dial normally.

7.7 The ringing mode of internal incoming call

The default is short ring 2 times for 1 second, wait 4 seconds, press this loop.

Optionally change to long ring 1 second, wait 4 seconds, and press this loop.

Outside incoming call is ringing 1 second, wait 4 seconds, and press this loop.

7.8 Duration of tap hook

When the flash key of the phone is invalid, or the call will be hang up, the

duration of tap hook should be adjusted according to the instructions in this section.

Instruction: 118 K#

Description:

K is 0 means short ring 2 times (default) and 1 means long ring 1second.

Instruction: 136 K#

Description:

K is 0 means protection off (default) and 1 means on.

Instruction: 116 K#

Description:

K is 0 means disable and 1 means enable. It will not broadcast if disable.

WEB:WWW.WS824.ORG TEL:020-85261379 18144823824

Summary of Contents for WS848-5D









































































Search results

Summary of Contents for WS848-5D

Reviews:

Brands by name

Popular brands

WS824 WS848-5D, Manual

Search results

Summary of Contents for WS848-5D

Reviews:

Brands by name

Popular brands