Woxcon IPH400D User Manual Download Page 34

Page: 34 / 44

1080p IP Streaming Encoder/Decoder

5.8.1.3. Factory Reset

Click the menu icon of the respective RX tile and click "Device Options", then click
“Factory Reset” to open prompt box. Click “Yes” to restore factory default.

5.8.1.4. Device Reboot

Click the menu icon of the respective RX tile and click "Device Options", then click
“Reboot” to open prompt box. Click “Yes” to reboot the device.

5.8.1.5. Firmware Upgrade

Click the menu icon of the respective RX tile and click "Device Options", then click
“Firmware Upgrade” to enter the below interface.

Select upgrade type and click “Browse” to add the update file, and then click “Submit”
to start the firmware upgrade.

5.8.1.6. Video File Management

Click the menu icon of the respective RX tile, and then click "Video File Management"
to enter the below interface to manage video recording files.

Summary of Contents for IPH400D












































Search results

Summary of Contents for IPH400D

Reviews:

Related manuals for IPH400D

Brands by name

Popular brands

Woxcon IPH400D, User Manual

Search results

Summary of Contents for IPH400D

Reviews:

Related manuals for IPH400D

Brands by name

Popular brands