1080p IP Streaming Encoder/Decoder
24
3) Select "Send/Receive IR".
4) A dialog box opens.
5) Enter the IR string you want to send.
6) Click the "Send"
button to send out the string.
7) Paired devices will receive the IR command.
Infrared Limitations
A Sender can either send IR data to a specific device (unicast) or broadcast to all
devices active on the network (broadcast). Should be noted however, that a sender
cannot send data simultaneously to a range of devices using multi-unicast
The data format used when sending IR data from control layer to a device is ‘Pronto’.
The link below points to a good description of Pronto format definition with examples.
http://www.remotecentral.com/features/irdisp1.htm