20
6-1 Software Download and Firmware Upgrades
6-2 Software Functions
(2) Preparing the Drone and Transmitter
Remove all the rotors from drones motors.
Connect the drone USB port located inside the battery
compartment to the computer via USB cable (Figure 1).
Power on the Transmitter.
(1) Downloading Recon Assistant Software
Got to
www.worldtechtoys.com/downloads
and find the “Recon Live Feed Camera Drone” section, click the link to
download the software. Unzip the downloaded file and run the software.
This software is compatible with windows
computers only. No Mac version available.
(3) Drone Firmware Upgrade
Obtain the latest firmware from the above link and save it to
your computer. Click the “Firmware” tab (1) and click “Select
the Firmware file” button (2) to choose the latest firmware file.
Click the “Start Update” button (3) to upgrade to the latest
firmware. Do not disconnect until the upgrade is finished.
(1) Calibrating the Transmitter
Run the Assistant Software. Click the “Status” tab (1),
then click the “Transmitter” tab (2) to enter the
transmitters control interface.
Turn on the transmitter and click the “Calibrate RC” button
(3) and move the transmitter control sticks according
to the prompts below.
Transmitter Calibration
After clicking the “YES” button,
rotate the Left and Right stick
along the maximum radius
(Figure 1) until the window
closes. If the motors power on
during this process, maintain the
Throttle stick on the lowest
position until the drone motors
lock.
Click the “YES” button to
start calibrating.
Leave the Left and Right stick
in the middle position to set the
neutral positions, then click the
“YES” button.
Figure 1
Select Yes to start calibrating,
select No to exit.
NO
Yes
Please leave all sticks in the middle
position. Select Yes.
Yes
Click Yes then quickly rotate both
sticks to the max radius within 2s.
Yes
6
Assistant Software
1
2
Firmware
Status
ID
Firmware Ver.
SN
Select the Firmware file
Start Update
English
3
1
2
3
Firmware
Status
English
RT Sensor
Transmitter
Calibrate RC
Drone Simulator
A
E
T
R
Aerial Photo Mode
POI Mode
Standard
Hovering
RTH Mode
Easy Mode
L1
L2
The Raptor Live Feed Camera Drone has assistant software that helps keep your drone up to date
and ready to fly. Calibrate the drone and transmitter or use the Drone Control Simulator to try out
the transmitters different controls and see the drones movements in 3D and in real time.
Figure 1
Figure 1
Summary of Contents for raptor
Page 1: ......
