14
Mode
2
When hovering, if the drone is moving from its position. You will need to recalibrate
via the assistant software or trimming buttons.
Caution
Figure 1
Figure 2
Figure 3
Figure 4
Left Stick
Right Stick
Front
Front
Front
Front
Power LED Indicator Position
1
2
3
4
Figure 2
Figure 1
(10) Switching between Mode 1 and Mode 2
Use the following procedure to switch modes:
(11) Transmitter Indicator Information
Power LED Indicator (Figure 2).
Solid LED: Working Mode
Flashing LED: Transmitter Link Calibration Mode
Turn the drone off.
Press the 4 trim buttons simultaneously (Figure 1).
The mode has switched when you hear a beep sound.
One beep indicates Mode 1.
Two beeps indicates mode 2.
Turn on the transmitter.
Trimming Mode should be locked.
Use the software to calibrate the drone and transmitter after switching modes.
Notice
Sound Indicators
Powering on the transmitter: One beep when turning on.
Low battery warning: Continuous beeping, replace batteries.
Unlock Trimming Mode: One beep.
Lock Trimming Mode: One beep.
Switching to Mode 1: One beep.
Switching to Mode 2: Two beeps.
Trimming Buttons
Adjusting with any trim button: One beep.
Maximum Trim: two fast beeps.
Neutral Trim Point: Two slow beeps.
Summary of Contents for raptor
Page 1: ......
