WORLD TECH ELITE raptor, Instruction Manual

Page: 14 / 22

13
(8) Link between the Transmitter and Drone
The link between transmitter and drone has already been established so you can initially skip this
procedure. If you ever replace the transmitter, re-establishing the link is required. Link the transmitter
by taking the steps below:
1
Be sure the drone is powered off.
2
Power off the Transmitter.
3
Press down T2 and T3 simultaneously and hold (Figure 2).
4
Power on the Transmitter.
5
Release two switches when the Transmitter indicator blinks.
6
Transmitter indicator stops flash and lighting stays solid.
7
This indicates that the link has been successfully established.
7
Power on the drone.
7
Figure 2
Remove the rotors when re-establishing the link.
(9) How to Operate the Transmitter
The Mode 1 and Mode 2 of the transmitter can be changed through Trimming Button.
For Basic Flight Operations see below and next page: (Figure 1),(Figure 2),(Figure 3),(Figure 4).
By default, the transmitter is set to Mode 1 so the left stick controls the throttle.
Mode 1 (Default)
Figure 1
Figure 2
Figure 3
Figure 4
Left Stick
Right Stick
Front
Front Front
Front