10
Power On
3
Transmitter
The transmitter features a number of different functions and modes as well as camera gimbal control,
taking photos, recording video, and adjusting camera settings. The transmitter system operates on
2.4GHz technology and has 10 channels.
3-1 Transmitter Operations
Figure 1
Please check that all sticks and switches on the transmitter are in the correct
starting position before powering on.
Warning
If the transmitter emits a continuous beep when turned on, the transmitters
batteries are low. Batteries should be changed before next flight.
Warning
Power on the transmitter before turning on the drone. After every flight make sure
to remove the drones battery first, then turn off the transmitter.
Warning
(1) Turning the Transmitter ON/OFF
To turn on the transmitter, push the power switch to the right on the
front of transmitter (Figure 1). The red LED indicator will light up.
To turn off the transmitter move the same switch to the left. The red
LED will turn off.
(5) Return To Home Mode
Toggle L1 to the Down Position to activate Return to Home Mode, the drone will return to the take off point automatically
and land as long as the GPS signal is greater than 5. The drone will maintain its current height when returning home if
the drones height is higher than 65 feet. If the drones height is lower than 65 feet it will ascend to 65 feet, return home
and land. Controls are disabled while this mode is in effect, toggle L1 to middle position if you need to use the controls
to avoid obstacles or regain manual control.
(L1 to Down Position, L2 to Middle Position)
(6) Low Battery Level Protection Mode
When the drones battery level drops below 10.8V, the drone will enter
Low Battery Level Protection Mode. The drones orange lights will begin
to flash slowly. An exclamation mark will appear on the Live Feed Screen.
The drone will automatically land at its current location after 60 seconds.
Return To Home Mode does not work once Low Battery Level Protection Mode is
activated.
Warning
During Low Battery Level Protection Mode the drone will begin its descent. All stick
controls except for throttle are available to use while descending to ensure the drone
can be moved to a safe landing area.
Attention
(7) Failsafe Mode (Signal Lost)
When the drone loses signal from the transmitter due to distance or signal interference the drone will enter Failsafe
Mode. The drone will automatically return to its take off point.
(If the GPS signal is greater than 5)
Summary of Contents for raptor
Page 1: ......
