Work Pro LightMouse LM-5 User Manual Download Page 5

Page: 5 / 64

BEFORE STARTING

Contents of the package

• 1 x LightMouse LM-5

• 1 x External power supply DC 5V 500mA

• 1 x User manual

Cautions

•

Information

To reduce the risk of electric shock or fire, do not expose this appliance to rain or moisture.

Do not spill water or other liquids on the unit.

Turn off the unit immediately, in case to detect malfunctions. If you detect smoke or unusual
odor from the equipment, stop using and unplug it.

Do not open the unit. Thre are not serviciable elements inside. Do not dismantle or modify
the unit, it will void the warranty

Do not try to repair it. Repairs by unqualified persons may cause damage or malfunction.
Contact an authorized service

•

humidity levels. The internal oxidation, can cause damage.

• Do not hit the unit. This product may malfunction, if subject to severe hits and vibrations.

• Keep away from strong magnetic fileds. Not use or place unit near equipment generating

strong electromagnetic radiation or magnetic fields. Heavy loads of these fields as radio

emitters, may interfere with or affect the internal circuitry of the product.

• Cleaning. Because of the smoke residue or dust, clean the outside of the required units.

Use a conventional glass cleaner and a soft cloth.

• Copyright. No section of this manual may be reproduced, transmitted, transcribed, stored in

any system or translated into any language deninguna form or medium without permission.

Keep the unit dry. This product is not water resistant and can malfunction if exposed to high

3 User Manual

Summary of Contents for LightMouse LM-5

































































Search results

Summary of Contents for LightMouse LM-5

Reviews:

Related manuals for LightMouse LM-5

Brands by name

Popular brands

Work Pro LightMouse LM-5, User Manual

Search results

Summary of Contents for LightMouse LM-5

Reviews:

Related manuals for LightMouse LM-5

Brands by name

Popular brands