Work Pro LightMouse LM-5 User Manual Download Page 7

Page: 7 / 64

Features

-Allows to control and program through WIFI connections up to 512 DMX channels from an

iOS or Android device.

-Memory with up to 100 scenes and 24 shows.

- Save and edit scenes and shows in the internal LM-5 memory.

- It allows to customize the control interface, adapting it to user needs on each facility.

-It works as ArtNet Node -2 compliant at all times.

Technical Data

- Compatible with LM-3E.

- Art-Net 2 node.

- Support OSC protocol.

- Ethernet-DMX Plug & Play receiver.

- Customizable interface.

-Dimensions (W x H x D): 80 x 45 x 80 mm.

-Mains supply: 5V 500mA

- Provides a better feedback of actions, editing and recording scenes and shows

- Makes it possible to integrate lighting control with audio edition and visual production programs
live.

5 User Manual

Summary of Contents for LightMouse LM-5

































































Search results

Summary of Contents for LightMouse LM-5

Reviews:

Related manuals for LightMouse LM-5

Brands by name

Popular brands

Work Pro LightMouse LM-5, User Manual

Search results

Summary of Contents for LightMouse LM-5

Reviews:

Related manuals for LightMouse LM-5

Brands by name

Popular brands