Work Pro LightMouse LM-5, User Manual

Page: 58 / 64

Creating a Push Button to access to previous scene
The entered command allows to pass to the previous scene after select a show and have played
it in manual mode through a Push Button.
As a push button can only have 2 values oscillating between 0 and 1, in Value Range section
we assign to the minimum (standby) and the maximum value (Active) the value 0 and 1
respectively.
To properly function, activate the Local Feedback Off, so, the Push Button not lit when you
click on the iPad, otherwise when the LM-5 run each of the scenes.
It should be borne in mind that due to some limitations on TouchOSC, at reaching the last scene
inside the show, the push button stays lit.
The specific command used is:
/dmx/play/show/prev ,f. Previous scene in Stop and Go mode.
Parameters:
Float: 1 or 0. If value=0, it does not effect
Note:
It returns [3] LM-5 Reply packages for certain actions
56 User Manual