Creating a
Push Button
to add a scene.
The specified command is:
As a push can only have 2 values oscillating between 0 and 1, in Value Range section we
assign the minimum value (Deactivated) and the maximum value (Activated) 0 and 1
respectively.
To properly function we activate the Local Feedback Off, therefore, the Push buttons not lit
when you click on the iPad, otherwise when the LM-5 record the scene.
The entered command allows to record a scene into selected show in Edit mode through a
Push Button.
/dmx/edit/rec, f. It saves the current scene
Parameters:
Float: If 1, it saves the scene. If 0, it does not effect
Note:
It returns /dmx/edit/rec ,f, with the similar parameters as the received in the message.
46 User Manual
Summary of Contents for LightMouse LM-5
Page 1: ...User Manual Rev 12 03 01 ...
Page 2: ......
Page 21: ...4º We return back and we click on Done We re ready to use our LM 5 19 User Manual ...
Page 63: ......
