If the speed sensor (»Firing speed RPM«) is not selected, the rotating speed displayed on
the controller is calculated from generator frequency and the number of poles.
If the generator frequency (»Firing speed Hz«) is not selected, the relative power
quantity will neither be registrated nor displayed (e.g. water pump application).
HMI only! In ToolKit-SC frequency, speed, and oil pressure can be enabled/
disabled separately; HMI is using a table »Firing speed« instead:
No.
Setting description
0
Gen frequency
1
Speed sensor
2
Speed Gen frequency
3
Oil pressure
4
Oil pr Gen frequency
5
Oil pr Speed sensor
6
Oil pr Speed Gen frequency
71
easYgen-400
B37884A
5 Operation
5.4.1 Disconnect during cranking
Released
