Woodward 2301E-ST, Installation And Operation Manual

Page: 48 / 126

Manual 26694 2301E-ST
Woodward 46
B** DISPLAY LOAD INFO **
Figure 3-10. Service: B** DISPLAY LOAD INFO ** Menu
This menu is used for general monitoring of the generator information.
01 LOAD CONTROL STATUS displays generator load control mode. Will display one of the following:
NO LOAD CONTROL
KW DROOP
SPEED DROOP
ISOCHRONOUS
UNLOADING
LOADING
02 LOAD SENSOR INPUT (KW) displays generator load in kilowatt. This value is calculated as the
current (I) multiplied by the phase angle between the voltage (V) and the current (I), (cos theta).
03 LOAD SENSOR PERCENTAGE displays the generator load in percentage (0-100%).
04 LOAD SHARING BIAS (RPM) displays the speed bias, in rpm, from the load sharing input.
05 LOAD SIGNAL OUT (VDC) indicates the generator KW in units of load Gain voltage. The value will
vary from 0.0 to 6.0 Vdc as the generator load varies from 0 to rated KW.
06 SYSTEM LOAD 0-3 (Vdc) displays the system load on the load sharing line as a function of the load
sharing lines. 0 equals zero percent load, 3 equals 100 percent load.
07 LOAD SHARING BIAS displays the speed bias percentage (0-100%).
Released