Woodstock ShopFox W1763W, Owner'S Manual, Page: 59 / 64

-57-
Model W1763W (For Machines Mfd. Since 09/16)
PA
RT
S
W1763W Labels A
10/22/15
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK WITHOUT WRITTEN APPROVAL!
Woodstock will not accept labels changed without approval. If artwork
changes are required, contact us immediately at
manuals@woodstockint.com
.
45 x 275mm
126 x 179mm
Motor: 2-1/2 HP, 240V, 1-Ph, 60 Hz, 12A
Spindle Speeds: 7,000 & 10,000 RPM
Motor Speed: 3450 RPM
Spindle Speeds: 7,000 and 10,000 RPM
Spindle Size: 1-1/4"
Spindle Travel: 3-1/2"
Maximum Cutter Diameter: 5"
Maximum Cutter Height: 2-3/8"
Table Size: 28-1/4" x 22"
Floor-to-Table Height: 33-3/8"
Weight: 483 lbs.
Specifications
Manufactured for Woodstock in China
Date
S/N
MODEL W1763W
2
1
⁄
2
HP SHAPER
To reduce risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Avoid entanglement with moving parts—tie back long hair, roll
up long sleeves, and do not wear loose clothing, gloves, or
jewelry.
4. Disconnect power before changing cutters or
adjusting/servicing shaper.
5. Before starting, ensure shaper is stable and properly set up,
guards are in place, and both spindle nuts are tight.
6. Always use overhead guard or a guarding fixture when
free-hand shaping or when adjustable fence is not in place.
7. Always keep fingers at least 6" away from spinning cutter—use
jigs, holding fixtures, or a power feeder when necessary to
maintain a safe distance.
8. Always feed workpiece against rotation of cutter.
9. Do not use awkward hand positions while feeding workpiece.
10. Reduce risk of kickback by taking multiple passes when
removing a large amount of material.
11. Never operate shaper while intoxicated, distracted, or tired.
12. Do not expose machine to rain or dampness.
13. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
W1763W Labels A
10/22/15
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK WITHOUT
WRITTEN APPROVAL!
Woodstock will not accept labels changed without approval. If artwork
changes are required, contact us immediately at
manuals@woodstockint.com
.
45 x 275mm
126 x 179mm
Motor: 2-1/2 HP, 240V, 1-Ph, 60 Hz, 12A
Spindle Speeds: 7,000 & 10,000 RPM
Motor Speed: 3450 RPM
Spindle Speeds: 7,000 and 10,000 RPM
Spindle Size: 1-1/4"
Spindle Travel: 3-1/2"
Maximum Cutter Diameter: 5"
Maximum Cutter Height: 2-3/8"
Table Size: 28-1/4" x 22"
Floor-to-Table Height: 33-3/8"
Weight: 483 lbs.
Specifications
Manufactured for Woodstock in China
Date
S/N
MODEL W1763W
2
1
⁄
2
HP SHAPER
To reduce risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Avoid entanglement with moving parts—tie back long hair, roll
up long sleeves, and do not wear loose clothing, gloves, or
jewelry.
4. Disconnect power before changing cutters or
adjusting/servicing shaper.
5. Before starting, ensure shaper is stable and properly set up,
guards are in place, and both spindle nuts are tight.
6. Always use overhead guard or a guarding fixture when
free-hand shaping or when adjustable fence is not in place.
7. Always keep fingers at least 6" away from spinning cutter—use
jigs, holding fixtures, or a power feeder when necessary to
maintain a safe distance.
8. Always feed workpiece against rotation of cutter.
9. Do not use awkward hand positions while feeding workpiece.
10. Reduce risk of kickback by taking multiple passes when
removing a large amount of material.
11. Never operate shaper while intoxicated, distracted, or tired.
12. Do not expose machine to rain or dampness.
13. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
WARNING
ACCIDENTAL INJURY
HAZARD!
Disconnect power
supply before
adjustments, setup,
or maintenance!
WARNING
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(800) 840-8420.
WARNING
ACCIDENTAL INJURY
HAZARD!
Doors and covers
must be closed
and latched before
starting machine!
Woodstock
Generic Shaper Labels
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK WITHOUT
WRITTEN APPROVAL!
Woodstock will not accept labels changed without approval. If artwork
changes are required, contact us immediately at manuals@woodstockint.com .
51 x 84mm 51 x 84mm 51 x 84mm
38 x 63mm
36 x 32mm
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
WARNING
ACCIDENTAL INJURY
HAZARD!
Disconnect power
supply before
adjustments, setup,
or maintenance!
WARNING
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(800) 840-8420.
WARNING
ACCIDENTAL INJURY
HAZARD!
Doors and covers
must be closed
and latched before
starting machine!
Woodstock
Generic Shaper Labels
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK WITHOUT
WRITTEN APPROVAL!
Woodstock will not accept labels changed without approval. If artwork
changes are required, contact us immediately at manuals@woodstockint.com .
51 x 84mm 51 x 84mm 51 x 84mm
38 x 63mm
36 x 32mm
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
WARNING
ACCIDENTAL INJURY
HAZARD!
Disconnect power
supply before
adjustments, setup,
or maintenance!
WARNING
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(800) 840-8420.
WARNING
ACCIDENTAL INJURY
HAZARD!
Doors and covers
must be closed
and latched before
starting machine!
Woodstock
Generic Shaper Labels
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK WITHOUT
WRITTEN APPROVAL!
Woodstock will not accept labels changed without approval. If artwork
changes are required, contact us immediately at manuals@woodstockint.com .
51 x 84mm 51 x 84mm 51 x 84mm
38 x 63mm
36 x 32mm
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
WARNING
ACCIDENTAL INJURY
HAZARD!
Disconnect power
supply before
adjustments, setup,
or maintenance!
WARNING
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(800) 840-8420.
WARNING
ACCIDENTAL INJURY
HAZARD!
Doors and covers
must be closed
and latched before
starting machine!
Woodstock
Generic Shaper Labels
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK WITHOUT
WRITTEN APPROVAL!
Woodstock will not accept labels changed without approval. If artwork
changes are required, contact us immediately at manuals@woodstockint.com .
51 x 84mm
51 x 84mm 51 x 84mm
38 x 63mm
36 x 32mm
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
401
402
404
403V2
406
408
409
410
412
WARNING
ACCIDENTAL INJURY
HAZARD!
Disconnect power
supply before
adjustments, setup,
or maintenance!
WARNING
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(800) 840-8420.
WARNING
ACCIDENTAL INJURY
HAZARD!
Doors and covers
must be closed
and latched before
starting machine!
Woodstock
Generic Shaper Labels
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK WITHOUT
WRITTEN APPROVAL!
Woodstock will not accept labels changed without approval. If artwork
changes are required, contact us immediately at manuals@woodstockint.com .
51 x 84mm
51 x 84mm 51 x 84mm
38 x 63mm
36 x 32mm
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
WARNING
ACCIDENTAL INJURY
HAZARD!
Disconnect power
supply before
adjustments, setup,
or maintenance!
WARNING
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(800) 840-8420.
WARNING
ACCIDENTAL INJURY
HAZARD!
Doors and covers
must be closed
and latched before
starting machine!
Woodstock
Generic Shaper Labels
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK WITHOUT
WRITTEN APPROVAL!
Woodstock will not accept labels changed without approval. If artwork
changes are required, contact us immediately at manuals@woodstockint.com .
51 x 84mm 51 x 84mm 51 x 84mm
38 x 63mm
36 x 32mm
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
404
405
407
411
Note:
Factory will punch round holes in the 2 circles above. These will
be sized to fit the Stop and Start buttons on the Model W1763.
Also punch square hole in center of label for Forward/Reverse switch.
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
WARNING: THIS LABEL ARTWORK SHALL NOT BE REPRODUCED AND IS ONLY TO BE USED
ON WOODSTOCK MACHINES.
W1763W Labels B
9/24/15
259 x 123mm
413
Motor: 2-1/2 HP, 240V, 1-Ph, 60 Hz, 12A
Motor Speed: 3450 RPM
Spindle Speeds: 7000, 10,000 RPM
Spindle Sizes: 1/2", 3/4"
Spindle Travel: 4"
Maximum Cutter Diameter: 5"
Maximum Cutter Height: 2-3/4"
Weight: 370 lbs.
Specifications
Mfd. for Woodstock in China
Date
S/N
MODEL W1763W
2
1
⁄
2
HP SHAPER
To reduce risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Avoid entanglement with moving parts—tie back long hair, roll
up long sleeves, and do not wear loose clothing, gloves, or
jewelry.
4. Disconnect power before changing cutters or
adjusting/servicing shaper.
5. Before starting, ensure shaper is stable and properly set up,
guards are in place, and both spindle nuts are tight.
6. Always use overhead guard or a guarding fixture when
free-hand shaping or when adjustable fence is not in place.
7. Always keep fingers at least 6" away from spinning cutter—use
jigs, holding fixtures, or a power feeder when necessary to
maintain a safe distance.
8. Always feed workpiece against rotation of cutter.
9. Do not use awkward hand positions while feeding workpiece.
10. Reduce risk of kickback by taking multiple passes when
removing a large amount of material.
11. Never operate shaper while intoxicated, distracted, or tired.
12. Do not expose machine to rain or dampness.
13. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
REF PART # DESCRIPTION REF PART # DESCRIPTION
401 X1763W401 CONTROL PANEL LABEL 408 X1763W408 WIDE BLACK STRIPE
402 X1763W402 EYE/EAR/LUNG LABEL 409 X1763W409 MODEL NUMBER LABEL
403V2 X1763W403V2 MACHINE ID LABEL W/TUV V2.09.16 410 X1763W410 THIN BLACK STRIPE
404 X1763W404 KEEP DOOR CLOSED LABEL 411 X1763W411 TOUCH-UP PAINT, SHOP FOX WHITE
405 X1763W405 ELECTRICITY LABEL 412 X1763W412 READ MANUAL LABEL
406 X1763W406 DISCONNECT 220V LABEL 413 X1763W413 SHOP FOX BLACK TOUCH-UP PAINT
407 X1763W407 SHOP FOX NAMEPLATE
Labels.&.Cosmetics
Safety.labels.warn.about.machine.hazards.and.how.to.prevent.serious.personal.injury..The.owner.
of.this.machine.MUST.maintain.the.original.location.and.readability.of.all.labels.on.this.machine..
If.any.label.is.removed.or.becomes.unreadable,.REPLACE.that.label.before.allowing.machine.to.
be.operated.again..Contact.us.at.
(
360
)
.734-3482.or.www.woodstockint.com.to.order.new.labels..