-34-
Model W1763W (For Machines Mfd. Since 09/16)
O
PE
R
ATIO
NS
The use of templates allows identical parts to be cut
with speed and accuracy. Shaping with a pattern begins
by attaching a prefabricated template to the rough
workpiece. The edge of the template rides against a rub
collar on the spindle as the cutter cuts the matching
profile on the workpiece edge, as shown in
Figure.47
.
Always perform test cuts on scrap stock to ensure pattern
works as required.
Template.Construction.Tips:
•
Use a material that will smoothly follow rub collar,
ball bearing or fence.
•
.
Make sure that screws or clamps will not come into
contact with the cutter.
•
Design the assembly so that cutting will occur
underneath the workpiece.
•
Make handles for safety and control.
•
Use materials that will move easily across the table
surface and rub collar.
•
If fence carriage remains attached for cutting
operation, adjust built-in hold-down height to
ensure pattern assembly remains tight to work table
surface.
•
Remember, there are tremendous cutting forces
involved. Fixtures must be solid and stable, and any
workpiece must be firmly secured.
Template.Shaping
Figure.47..
Profile of a template being
used.
Template Rub Collar
Workpiece
CUTTER.CONTACT.HAZARD!
Cutting. small. or. narrow. workpieces.
greatly. increases. the. risk. of. cutter.
contact. during. operation.. Use. jigs. or.
holding.devices.when.cutting.to.reduce.
this.risk.