HM126 Operator’s Manual
WORK AREA
•
Keep work area clean,
free of clutter and well lit.
Cluttered and dark work areas can
cause accidents.
•
Do not use your sawmill where there is a risk of causing a fire or an explosion;
e.g. in
the presence of flammable liquids, gasses, or dust. Power tools create sparks which may
ignite the dust or fumes.
•
Keep children and bystanders
away
while operating a power tool. Distractions can cause
you to lose control, therefore, visitors should remain a safe distance from the work area.
•
Be aware of all power lines,
electrical circuits,
water pipes and other mechanical hazards in
your work area, particularly those hazards below the work surface hidden from the operator’s
view that may be unintentionally contacted and cause personal harm or property damage.
•
Be alert of your surroundings.
Using power tools in confined work areas may put you
dangerously close to cutting tools and rotating parts.
INTERNAL COMBUSTION ENGINE SAFETY
HM126-MY2021-EN: Rev F
Page of
7
112
14-Jul-2021
Internal combustion engines present special hazards during operation and
fuelling. Read and follow the warning instructions in the engine Owner’s
Manual and the safety guidelines below. Failure to follow the warnings
and safety standards could result in severe injury or death.
•
DO NOT
run the machine indoors or in an enclosed area such as a deep
trench unless adequate ventilation, through such items as exhaust fans
or hoses, is provided. Exhaust gas from the engine contains poisonous
carbon monoxide gas (CO); exposure to carbon monoxide can cause
loss of consciousness and may lead to death.
•
DO NOT
smoke while operating the machine.
•
DO NOT
smoke when refuelling the engine.
•
DO NOT
refuel a hot or running engine.
•
DO NOT
refuel the engine near an open flame.
•
DO NOT
spill fuel when refuelling the engine.
•
DO NOT
run the engine near an open flame.
•
ALWAYS
refill the fuel tank in a well-ventilated area.
•
ALWAYS
replace the fuel tank cap after refuelling.
•
ALWAYS
check the fuel lines and the fuel tank for leaks and cracks
before starting the engine. Do not run the machine if fuel leaks are
present or the fuel lines are loose.
•
ALWAYS
avoid contact with hot fuel, oil, and exhaust fumes.
WARNING!
