Alignment
Adjustment of the Bed Rails
6
6-14
doc013119
Alignment
6.1.17
Adjustment of the Bed Rails
Position the saw head over the front bed rail (from the belt conveyor side). Measure the
distance from the bed rail to the blade, near the left (A) and right (B) blade guides. The
measurements should be the same.
See Figure 6-18.
To adjust the bed rail, loosen the locking bolts. Then, using the
adjustment bolts, adjust the bed rail so the measurments A and B are the same. The
distance between the bed rail and cant stop should not be larger than 18mm. When the
adjustment is done, tighten the locking nuts.
Move the saw head over the last bed rail. Adjust the last bed rail so the distances from the
blade to the last bed rail are the same. Then attach a rope to the first and last bed rails.
FIG. 6-18
Locking Bolts
Adjustment Bolts
Summary of Contents for Titan WB2000-EC
Page 1: ......
Page 2: ......
Page 30: ...Setup Operation Sawmill Setup 4 4 4 EGdoc013119 FIG 4 3 WB2000 hes_017_A Lifting brackets...
