Wood-mizer Titan WB2000-EC, User Manual

Page: 13 / 94

Safety
Sawmill Setup
EGdoc013119 2-2
2
2.2 Sawmill Setup
WARNING! Securely fasten rails of a sawmill to the floor before operating
the sawmill. Failure to do so may result in serious injury or death.
WARNING! The sawmill should be set up on firm, level ground and must
be fastened to the ground.
CAUTION! Changes in temperature could cause blade tension changes.
Release the blade tension when the sawmill is not in use.
2.3 Sawmill Operation
IMPORTANT! The sawmill is intended for sawing wood only. See
Section
6.3 Cutting Capacity
for log size capacities of the machine.
IMPORTANT! The sawmill’s operator should get training in operation and
adjustment of the machine.
DANGER! Make sure all guards and covers are in place and secured
before operating. Failure to do so may result in serious injury.
Be sure the blade housing and pulley covers are in place and secured,
and the safety switches located on them are engaged. Use the rubber
latches to fasten the blade housing covers shut.
DANGER! Always keep hands away from moving bandsaw blade. Failure
to do so may result in serious injury.
DANGER! Keep all persons out of the path of moving equipment and logs
when operating the sawmill or loading and turning logs. Failure to do so
may result in serious injury.
DANGER! Maintain a clean and clear path for all necessary movement
around the mill and lumber stacking areas. Failure to do so may result in
serious injury.
DANGER! Always be sure all persons are out of the path of the blade
before starting the motor. Failure to do so may result in serious injury.
WARNING! When operating or servicing the machine, always wear eye,
ear and foot protection as well as safety clothing. Failure to do so may
result in serious injury.
!