Setup & Operation
Sawmill Setup
EGdoc013119
4-1
4
SECTION 4 SETUP & OPERATION
4.1
Sawmill Setup
IMPORTANT!
Before starting to use the sawmill, you have to meet the
following conditions:
The sawmill must not be operated without a sawdust extraction system connected and started.
The sawmill should be operated under roof only.
The sawmill can be operated in the temperature range of -15
o
C to 40
o
.
The intensity of light at the operator’s work-place must be at least 300lx
1
.
The operator’s work-place is shown in the figure below.
The protective fence should be installed according to the figure below. Fence height - 1.8 m.
IMPORTANT!
It is impossible to fence off the persons who are on the
other side of the sawmill who feed and remove boards Be sure that all
persons are away from the sawmill before starting it.
1. The light can not cause stroboscopic effect.
!
!
Summary of Contents for Titan WB2000-EC
Page 1: ......
Page 2: ......
Page 30: ...Setup Operation Sawmill Setup 4 4 4 EGdoc013119 FIG 4 3 WB2000 hes_017_A Lifting brackets...
