Alignment
Adjustment of the Blade Guides and Blade Guide Arm
6
6-12
doc013119
Alignment
6.1.13
Adjustment of the Blade Guides and Blade Guide Arm
See Figure 6-14.
Adjust the blade guide arm fully open. Measure the distance between
the back edge of the blade guide bracket and the back of the blade. Next, adjust the
blade guide arm all the way in toward the inner blade guide assembly. Measure the
distance again.
The two measurements should be the same. If not, adjust the blade guide arm in the hor-
izontal plane.
See Figure 6-15.
Loosen the horizontal adjustment bolt jam nuts. To tilt the arm towards
the blade, loosen the right bolt and tighten the left bolt. To tilt the arm away from the
blade, loosen the left bolt and tighten the right bolt. Re-tighten the jam nuts and recheck
the blade guide arm horizontal tilt.
FIG. 6-14
FIG. 6-15
Summary of Contents for Titan WB2000-EC
Page 1: ......
Page 2: ......
Page 30: ...Setup Operation Sawmill Setup 4 4 4 EGdoc013119 FIG 4 3 WB2000 hes_017_A Lifting brackets...
