70
The description of the interface is as below:
TERMS
DESCRIPTION
Auto Offload
Default: Disable
Enable or Disable Auto Offload feature. This feature can be activated when
the Wi-Fi is configured as the client mode and the Cellular interface is
established. And it will show the current signal strength.
Signal low-threshold
Default: -80 dBm (Range: -1 ~ -100 dBm)
When signal strength is lower than the upper range, then the connection
will be directed to Cellular.
Signal high-threshold
Default: -50 dBm (Range: -1 ~ -100 dBm)
When signal strength is higher than the upper range, then the connection
will be directed to Wi-Fi.
Switch mode
Default: Auto
When user chooses the
Auto mode
, the connection will automatically
switch to the stronger signal between Wi-Fi or Cellular. If user chooses to
Once mode
, it means the connection will switch to the stronger signal once
between Wi-Fi or Cellular and will stay at the connection even there were a
stronger signal appear.
Active Path
Show the current active path between Wireless or Cellular.
Default Gateway
Show the default gateway IP Address.
