65
The description of the columns is as below:
TERMS
DESCRIPTION
A-MPDU/A-MSDU
aggregation
For the AP mode, by enabling this function the data rate of the AP could
be enhanced greatly, Do not enable this function if the wireless clients
don’t support A-MPDU/A-MSDU aggregation.
Short GI
Enable this function
to obtain better data rate. (careful with compatibility
issue)
RTS Threshold
Default: 2347 (1-2347)
Basically, it is about the transmission process between the AP and the end
station. When the AP sends Request to Send frames to station and it will
do the negotiation process about sending the data frame. When the
station receives an RTS frame, the station will respond with send back
Clear to Send frame to confirm the right to start transmission.
Fragment Threshold
Default: 2346 (256-2436)
Specify the maximum size in byte for a packet before data is fragmented
into multiple packets. Setting it too low may result in poor network
performance.
Beacon Interval
Default: 100ms (20-1024 ms)
Specify the interval to broadcast packets.
DTIM Interval
Default: 1 (1-255)
Delivery Traffic Indication Message interval is an additional message added
after the beacon interval broadcast by access point. It is for enhancing the
wireless transmission efficiency. The more intervals we added, the more
