101
3.11.2 ARP TABLE
Basically, WoMaster device is supported with two types of ARP which is the standard ARP and ARP with 802.2 LLC
Type 2. Address Resolution Protocol (ARP) is a protocol for mapping an Internet Protocol address (IP address) to a
physical machine address that is recognized in the local network. A table, usually called the ARP cache, is used to
maintain a correlation between each MAC address and its corresponding IP address. ARP provides the protocol rules
for making this correlation and providing address conversion in both directions. The other ARP feature is ARP with
802.2 LLC Type 2 is the new level of ARP where the device will response the request of 802.2 snap ARP on the
Ethernet port and not support sending the request of 802.2 snap ARP. Below is the Data format.
This page shows the routers active ARP table. An ARP table contains recently cached MAC addresses of every
immediate device that was communicating with the router.
Click on
Reload
to change the value.
Data Format
Protocol Header:
802.3 + 802.2 LLC + 802.2 snap
|- (DS + SA + Len) -|- DSAP + SSAP + CTRL -|- Org + type
