31
802.1 VLAN
Default: Disable
Choose enable to activate the function.
Management VLAN
Default: 1
The switch supports management VLAN. The management VLAN ID is
the VLAN ID of the CPU interface so that only member ports of the
management VLAN can ping and access the switch.
Ethernet 1
Default: Enable
Default: Auto / Auto-Negotiation
Configure the Speed/Duplex of the port Ethernet 1. Users can set the
bandwidth of each port as Auto-negotiation, 100 full, 100 half, 10 full,
10 half mode.
Ethernet 2
Default: Enable
Default: Auto / Auto-Negotiation
Configure the Speed/Duplex of the port Ethernet 2. Users can set the
bandwidth of each port as Auto-negotiation, 100 full, 100 half, 10 full,
10 half mode.
Click
Submit
to apply the configuration that just made.
3.2.3 TRAFFIC CONTROL
Traffic control is a form of flow control used to enforce a strict bandwidth limit at a port. User can configure
separate Incoming Outgoing rate limits and burst
The description of the columns is as below:
TERMS
DESCRIPTION
Enable Traffic Control
Check the box to activate the function
Incoming Rate Limit
Default: 1024000 kbit/s
Set the maximum incoming rate.
Incoming Burst
Default: 20 kBytes
Set the maximum incoming burst.
