13
2.6 DIN RAIL MOUNTING
The EN50022 DIN-Rail plate should be already attached to the back panel of the device screwed tightly. If user needs
to reattach the DIN-Rail attachment plate to the device, make sure the plate is situated towards the top, as shown by
the following figures.
To mount the router on DIN Rail track, do the following instruction:
1.
Insert the top side of DIN Rail track into the slot of DIN Rail clip.
2.
Lightly clip the bottom of DIN-Rail to the track and make sure it attached well.
3.
To remove the device from the track, reverse the steps.
