37
Parity
Default: NONE
Set parity bit of serial data.
For even and odd parity, the serial port will set the parity bit (the last bit after
the data bits) to a value to ensure that the transmission has an even or odd
number of logic high bits. Mark and space parity does not actually check the
data bits, but simply sets the parity bit high for marked parity or low for
spaced parity.
Databit
Default: 8 bits
Indicates the number of bits in a transmitted data package.
Stopbit
Default: One Stopbit
The stop bit follows the data and parity bits in serial communication. It
indicates the end of transmission.
Flow Control
Default: NONE
Flow control manages data flow between devices in a network to ensure
it is processed efficiently. Too much data arriving before a device is
prepared to manage it causes lost or retransmitted data.
Terminal Resistor
Default: Disable
Enable to prevent serial signal reflection.
Force TX Interval
Default: 0 (ms)
Force TX interval time is to specify the timeout when no data has been
transmitted and queue data before the time interval is expired.
Force TX Length
Default: 1024 (bytes)
To specify the length of the data before Force timeout expires.
Service Mode
Choose TCP Server, TCP Client, and UDP listening.
Serial to Ethernet
Delimiter
: User can define max. 4 delimiters (0~255, Hex) for each way.
The data will be held until Flush Time is expired. 0 means disable. The
factory default is 0.
Flush Time
: The received data will be queued in the buffer until all the
delimiters are matched. When the Flush Time is expired the data will be
sent.
Ethernet to Serial
Delimiter
: User can define max. 4 delimiters (0~255, Hex) for each way.
The data will be held until Flush Time is expired. 0 means disable. The
factory default is 0.
Flush Time
: The received data will be queued in the buffer until all the
