64
needs to enter a key in each WLAN node. The data encryption can only
TKIP.
WPA2-PSK
: A new version of WPA, only clients that supported with WPA2
can apply this security function. The data encryption can only be AES and
WPA Pre-Share Key is required.
WPA-PSK&WPA2-PSK
: The data encryption will be AES & TKIP and WPA
Pre-Share Key is required.
Encryption
Configure the data encryption mode.
None
: Available only when the authentication type is an open system.
64 bits WEP
: It is made up of 10 hexadecimal numbers.
128 bits WEP
: It is made up of 26 hexadecimal numbers.
TKIP
: Temporal Key Integrity Protocol, which is a kind of dynamic
encryption, is co-used with WPA-PSK.
AES
: Advanced Encryption Standard, it is usually co-used with
WPA2-PSK.
Key Type
Default: Hex
WEP can be configured with a 64-bit or 128-bit Shared Key (hexadecimal or
ASCII). As defined, hexadecimal number is represented by 0-9, A-F or a-f;
ASCII is represented by 0-9, A-F, a-f or punctuation. Each one consists of
two-digit hexadecimal.
Default Key
Default: Key 1
Set the specific default key.
Key 1~4
Enter the specific encryption key.
3.7.4 ADVANCED
The page allows the advanced user to configure advanced wireless setting with more experience about the WLAN. If
user doesn’t have any qualified knowledge about WLAN, we suggest not to change the default setting except user
know what is the effect when the setting is changed. The wrong configuration may impact the performance of
wireless network.
