Wolf Drawer Microwave Oven, General Information Manual

Page: 56 / 84

FOOT COVER REMOVAL
Remove the Foot Cover
The foot covers slide over the front legs of the unit.
Pull the foot cover away from the unit.
FOOT COVER INSTALLATION
Install the Foot Cover
Slide the foot cover over the unit front leg.
SKIRT REMOVAL
To remove the skirt, first remove:
1
Oven door
Remove the Skirt
1 Use a T-20 Torx bit to remove the skirt mounting screws.
2 Lift the skirt up, removing it from the hooks.
3 Remove the skirt from the unit.
SKIRT INSTALLATION
After installing the skirt, install:
1 Oven door
Install the Skirt
1 Place the skirt onto the hooks of the unit.
2 Use a T-20 Torx bit to install the skirt mounting screws.
COVER COLLAR REMOVAL
To remove the cover collar, first remove:
1 Oven door
2
Skirt
Remove the Cover Collar
1 Use a T-20 Torx bit to remove the lower screws.
2 Use a T-15 Torx bit to remove the right door bumper.
3 Use a
3
/
16
" Allen wrench press in the door switch shaft and
remove the left door bumper.
4 Pull the top of the cover collar forward.
5 Thread the lower part of the cover collar over the hinges.
30" and 36" Induction Range
Cavity Component Removal and Installation
CAVITY COMPONENT REMOVAL AND INSTALLATION
service.subzero.com
829191 REVA 56