Coil Temperature Readout provides the coil temperature in °C.
•
Touch the left rear
(high) to move forward to Heat Sink
Temperature Readout.
•
Five dots appear on the left rear power level selector.
•
The display shows the ambient control temperature in °C. If
the temperature is over 99°C, the decimal point of the
display turns on to indicate the temperature is 100°C or
higher.
•
The left front (low) and
(high) are dimmed.
•
The left front (low) and
(high) cycle through the Coil
temperatures.
•
A fully illuminated dot on the left front control indicates
which coil temperature is shown:
•
LED 1 refers to coil #1.
•
LED 2 refers to coil #2.
•
LED 3 refers to coil #3.
•
LED 4 refers to coil #4.
•
LED 5 refers to coil #5.
•
Touch the left rear (low) to move backward to Heat Sink
Temperature Readout.
•
Touch the left rear
(high) to move forward to Error Code
Readout.
•
Touch to return to the lock setting.
•
Not touching the cooktop for 30 seconds returns the
cooktop to the lock setting.
Error Code Readout
When entering Diagnostics Mode, one dot appears on the left
rear power level selector.
TIP: The fully illuminated dots in the image are shown larger for
clarity.
Error Code Readout shows the stored error codes.
•
Touch the left rear
(high) to move forward to Error Code
Readout.
•
Six dots appear on the left rear power level selector.
•
The display shows the current error code.
•
The left front control zone shows 0-8 dimmed dots based
on how many error codes have been logged.
•
A fully illuminated dot on the left front control indicates
which error code is shown.
•
If only a single error has been logged, only a single fully
illuminated LED is shown.
•
If more than eight error codes are logged, the error log
acts as a ring buffer with the most recent error codes
being shown.
•
If no error codes are logged, no dots appear. The display
shows double dashes.
•
The left front (low) and
(high) are dimmed.
•
The left front (low) and
(high) cycle through the error
codes.
•
Touch and hold the left front for 5 seconds to clear the
error code history. Clearing the error code history is only
possible if at least one error code was logged. A double
beep confirms the error log history has been cleared.
•
When the error log history is cleared and an error is still
present, it immediately regenerates.
•
Touch the left rear (low) to move backward to Coil
Temperature Readout.
•
Touch the left rear
(high) to move forward to Software
Version Indicator.
•
Touch to return to the lock setting.
•
Not touching the cooktop for 30 seconds returns the
cooktop to the lock setting.
Software Version Indicator
When entering Diagnostics Mode, one dot appears on the left
rear power level selector.
TIP: The fully illuminated dots in the image are shown larger for
clarity.
30" and 36" Induction Range
Cooktop Controls
COIL TEMPERATURE READOUT (continued)
service.subzero.com
829191 REVA
43
