Wohler iAM-MIX-16 User Manual Download | Manualshive

Page: 6 / 108

background image

Page 6

CHAPTER 1: Installation

Introduction

Overview

The iAM-MIX intelligent adaptable monitors are 1RU multichannel multi-source
audio monitors with multiple standard copper connections and multiple SFP module
options facilitating high density coax and optical fiber connections. They feature
direct integration capability with Evertz, Tally, and Grass Valley routers for channel
name synchronization. The iAM-MIX may also accept Audio over IP signals via an
Ethernet connector. Refer to the Specifications section or contact Wohler Sales for
more information for Audio over IP capabilities. The iAM-MIX may be optionally
configured to allow routing of any inputs to almost any outputs.

The iAM-MIX has individual channel volume controls and mute switches. With
certain exceptions related to master clock compatibility, any channel from any
source stream may be audibly monitored and mixed with the other selected
channels. The iAM-MIX is small, flexible, moderately priced, and simple to operate.
Its setup configuration can easily be copied to other iAM-MIX units.

Setups are created with a web browser over a network connection. Each iAM-MIX
can be configured with up to 64 Presets. Nothing about the configurations of those
predefined setups can be changed from the front panel. This prevents less
experienced or hurried operators from making accidental setup changes that could
compromise their usage of the unit. It also reduces operator training to a minimum.

Safety

Instructions

1.

Read, keep, and follow all of these instructions; heed all warnings.

2.

Do not use this equipment near water.

3.

Use only a dry cloth to clean the equipment.

4.

Do not block any ventilation openings.

5.

Do not install near any heat source such as a radiator, heat register, amplifier, or
stove.

6.

Do not attempt to plug the unit into a two-blade outlet (with only two prongs of
equal width).

Important:

By design, this monitor will only plug into a three-prong outlet for
your safety. If the plug does not fit into the outlet, contact an
electrician to replace the obsolete outlet.

«
...
4
5
6
7
8
...
»

Summary of Contents for iAM-MIX-16













































































































Reviews:

No comments

Related manuals for iAM-MIX-16

Brand: Abicor Binzel Pages: 8

Brand: Cambridge SoundWorks Pages: 20

Passport PD-250

Brand: Fender Pages: 36

Brand: XD XCLUSIVE Pages: 20

Brand: Parkside Pages: 94

Brand: Party Light & Sound Pages: 28

Prestige SuperTweeter ST200

Brand: Tannoy Pages: 13

Brand: Tannoy Pages: 22

Brand: Tannoy Pages: 17

Brand: Tannoy Pages: 40

Brand: Tannoy Pages: 12

Brand: Tannoy Pages: 10

Brand: Tannoy Pages: 27

Brand: Tannoy Pages: 2

Brand: Magnat Audio Pages: 47

Brand: JBL Pages: 6

Brand: Panasonic Pages: 2

Brand: BSM Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands