Wohler iAM-MIX-16 User Manual Download | Manualshive

Page: 11 / 108

background image

Page

11

1.

Speakers

:

Audio monitoring is achieved through the use of class D amplifiers

driving two (left/right) wide range speakers.

2.

Headphone Jack

:

A 1/4" jack for an optional headphone is provided on the

front panel. Speaker audio mutes when headphones are plugged in.

3.

Channel Volume/Mute

: Rotating each

Channel Volume/Mute

control

adjusts the individual level of each corresponding channel. Pressing this

control

knob alternately mutes or unmutes the associated channel. Holding the control
knob pressed for two seconds solos the associated channel and mutes all others.

4.

Master Volume

: This control adjusts

the level of the entire mix. Note that while

there is a dedicated

Master Volume

control on the iAM-MIX-8, the iAM-MIX-16

incorporates a control that can be set up to be either a

Master Volume

control

or a 16th

Channel Volume/Mute

control. When the control is optioned to be a

Master Volume

, it control the volume of all of the channels, including channel

16. Pressing a Master Volume control alternately mutes or unmutes the entire
mix.

5.

Control Strips and Level Meters

: These miniature displays identify each

Channel Volume/Mute

control and provide a basic 10-segment level meter for

each channel. The displays will automatically dim if the none of the front panel
controls have been used for an hour, but will brighten again when any control is
adjusted. Refer to the

Channel Displays

section of this chapter for further

information on the functions of the

Control Strips and Level

Meters.

6.

Preset/Config Button

: Pressing this button activates a menu for Preset

selection and configuration status information. Refer to the

Preset/Config

Menu

section of this chapter for a description of how to use this button.

7.

USB

:

This USB 2.0 Type A connector allows you to use a flash drive (not

supplied) to perform software updates or copy system configurations to another
iAM-MIX or to a PC.

8.

Power Indicator

: The

Power

indicator lights blue whenever the iAM-MIX is

connected to power.

«
...
9
10
11
12
13
...
»

Summary of Contents for iAM-MIX-16













































































































Reviews:

No comments

Related manuals for iAM-MIX-16

security system

Brand: Safe-at-home Pages: 5

Brand: Hama Pages: 28

Brand: Hama Pages: 28

Brand: JAMO Pages: 21

Brand: LaCie Pages: 13

Brand: GDC Pages: 40

Brand: 3SIXT Pages: 4

Brand: Cambridge Audio Pages: 4

PlayWorks PS2000 Digital

Brand: Cambridge SoundWorks Pages: 22

MegaWorks THX 2.1 250D

Brand: Cambridge SoundWorks Pages: 13

Center Channel II

Brand: Cambridge SoundWorks Pages: 7

Brand: Cambridge SoundWorks Pages: 14

Brand: Cambridge Audio Pages: 4

Brand: d&b audiotechnik Pages: 11

Home Theater System

Brand: M&S Systems Pages: 8

Brand: DaytonAudio Pages: 2

Brand: DaytonAudio Pages: 12

Brand: DAY Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands