Page
14
f.
SMTPE 2110 or 2022-6 Receiver
: This uses Multi-Mode 850 NM,
LC fiber connectors. It allows the iAM-MIX to monitor SDI audio
transmitted in real time over Ethernet. You must use the emSET
configuration software to set up this option. It is available from
Wohler Technologies Technical Service.
11.
Analog Inputs:
This DB-25 female connectors a10dBu
broadcast level balanced audio. Tascam pinout cables may be used, and
can be purchased Wohler Sales. Refer to Figure 2-4 for the pinout of this
connector.
Figure 2-4: Analog DB25 Input Connections
12.
Analog Outputs:
These male XLR connectors provide two balanced
analog outputs:
Left
and
Right
. The source of these signals is the mix of
audio as monitored by the internal speakers. If the licensed Common
Output Routing feature is installed, these outputs can be configured to
supply virtually any mix of input signals. This is described in Chapter 4.
Figure 2-5: Analog XLR Output Connections
