Wohler iAM-MIX-16 User Manual Download | Manualshive

Page: 51 / 108

background image

Page

51

4.

The Web GUI will indicate progress of the software installation and results.

5.

The iAM-MIX will display a message when the upgrade is complete and then
reboot.

6.

Remove the USB drive any time after upgrade is complete.

7.

The iAM-MIX is finished upgrading and rebooting after the Power indicator
returns to its green color and the front panel display is back to normal. The
flash drive may now be removed from the iAM-MIX unit.

8.

After the iAM-MIX reboots, either

Refresh

the browser by clicking on the

Wohler logo, or close and reopen the browser for normal operation of the
Web GUI.

Updating an iAM-MIX Remotely

Remote upgrading is available for any networked iAM-MIX that is currently at
version 2.8-2 or higher. This feature is useful if it is inconvenient to physically
access some of the iAM-MIX units in the system to insert a flash drive. You may
download an update file from the Wohler Web Site (

www.Wohler.com

) and access

the downloaded file directly from the Web GUI.

Use the following steps to remotely upgrade an iAM-MIX unit:

1.

Download the update file into the computer containing the Web GUI. Refer to
the

Download the Software

section of this chapter.

2.

Connect to the iAM-MIX to be updated using the Web GUI.

3.

Click on the

System Update

tab and locate the

System Update

box at the

bottom of the screen. Refer to Figure A-2.

4.

You click the

Add Files

button to locate and select the downloaded update

file or, on Versions 3.4-19 or above, you may drag and drop the update file
you downloaded into the "Drop Wohler Package Here" box.

5.

Before proceeding, note that the iAM-MIX that is being upgraded will no
longer be operational for the duration of the update.

If there may be other

personnel who may using or need to use this iAM-MIX unit, notify
them that the unit will be out of service for a time. During that time,

Important:

The Web GUI is required to perform this software upgrade procedure.
Refer to Chapter 4

First Time IP Assignments

if not already set up

for your network.

Important:

Do not interrupt or remove power to the iAM-MIX, or remove
the USB drive during the installation process.

Doing so could crash

the iAM-MIX software.

«
...
49
50
51
52
53
...
»

Summary of Contents for iAM-MIX-16













































































































Reviews:

No comments

Related manuals for iAM-MIX-16

Brand: Panasonic Pages: 2

RXD15 - RADIO CASSETTE W/CD

Brand: Panasonic Pages: 8

Brand: KEF Pages: 6

Brand: Daewoo Pages: 66

Brand: 808audio Pages: 2

Brand: Harman Kardon Pages: 2

Brand: Harman Kardon Pages: 2

Brand: Harman Kardon Pages: 2

Brand: Harman Kardon Pages: 2

Brand: RBH Sound Pages: 12

Brand: Teac Pages: 3

Brand: ESAB Pages: 143

Brand: JBL Pages: 2

Bamboo X speaker

Brand: XD XCLUSIVE Pages: 20

Brand: Care Call Pages: 2

Brand: Laney Pages: 12

Area Line Pressure Alarm

Brand: BeaconMedaes Pages: 10

Brand: Bang & Olufsen Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands