Wohler iAM-MIX-16 User Manual Download

Page: 4 / 108

Page 4

Remote Monitoring ......................................................................................... 27

Configuration - Preset Setup............................................................................ 28

Common Output Routing................................................................................. 32

Destination Outputs.............................................................................. 32

Routing Inputs ..................................................................................... 33

Output Options .................................................................................... 34

Preset Output Routing........................................................................... 35

Typical Questions Regarding Output Routing...................................................... 36

How do I route sources being audibly monitored to the XLR and AES outputs?
.......................................................................................................... 36

How do I output pre-fade signals on one output and post-fade outputs on
another? ............................................................................................. 36

How do I make some outputs follow Mutes and Solos while making other
outputs ignore them? ........................................................................... 37

How do I route only specific monitored channels to the Analog XLR outputs?
.......................................................................................................... 37

How do I configure outputs for Source Select options, without creating
Presets? .............................................................................................. 37

How do I keep the internal speakers always muted and send audio only to the
Analog XLR outputs?............................................................................. 38

How do I ensure that outputs get automatically muted when a headphone is
inserted into the headphone jack? .......................................................... 39

Why are AES Pairs 1, 2, 3, and 4 in the Output Routing Matrix? ................. 39

What are AoIP-Pair 30 and AoIP Pair 31? ................................................ 39

How do I route signals to the Analog XLR Outputs in a way that Master
Volume doesn't affect this output but Channel Volume and Mute/Solo does? 40

How do I make Channel Volume, but not Mutes or Solos, affect the output? 40

Configuration – Device Management................................................................. 41

Database Management ................................................................................... 42

Export Presets ..................................................................................... 42

Import Presets ..................................................................................... 43

Scan Network-Discovery ................................................................................. 44

Network Setup ............................................................................................... 44

System Setup ................................................................................................ 45

Factory Reset ................................................................................................ 48

APPENDIX A: Software Upgrades.......................................................... 49

Introduction .................................................................................................. 49

Download the Software ................................................................................... 49

Installing the Software Locally ......................................................................... 49

Updating an iAM-MIX Remotely ........................................................................ 51

Updating Multiple iAM-MIX Units ...................................................................... 52

APPENDIX B: Dante Network Setup ...................................................... 55

Introduction .................................................................................................. 55

What is in the iAM-MIX for Dante ..................................................................... 55

Dante Device Setup ........................................................................................ 57

Dante Clock Selection ..................................................................................... 58

Channel Names.............................................................................................. 58

AES67 .......................................................................................................... 59

Summary of Contents for iAM-MIX-16













































































































Search results

Summary of Contents for iAM-MIX-16

Reviews:

Related manuals for iAM-MIX-16

Brands by name

Popular brands

Wohler iAM-MIX-16, User Manual

Search results

Summary of Contents for iAM-MIX-16

Reviews:

Related manuals for iAM-MIX-16

Brands by name

Popular brands