Page
54
8.
When the update is complete, each updated
Target
unit will restart and
again be ready for use.
9.
If you have also updated the unit to which the Web GUI is connected, after
the iAM-MIX unit(s) reboot, either
Refresh
the browser by clicking on the
Wohler logo, or close and reopen the browser for normal operation of the
Web GUI.
Important:
Do not interrupt or remove power to any of the iAM-MIX units
being updated, and do not remove the USB drive during the
update process.
Doing so could crash the iAM-MIX software.