Wohler AMP1-E8DA, User Manual, Page: 77 / 90

821016: AMPx-E8 Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
65
Chapter 6 Setup Menu
Startup
de-embedded SDI AES signals, but does not affect the reclocked SDI
output in any way.
Figure 6–13 SDI Delay
Step through settings using the Up or Down button, select 140 ms (for
example). To accept, press the Enter button. Press the Esc button to
exit Setup Mode and return to Normal Monitoring Mode .
Startup
The
Startup
entry within the Setup Menu determines the input used
by the unit at power up. When set to
Last Used
, the unit will power
up the same way that the unit was before power was interrupted. If
instead you want to have the unit start up every time with the same
input selected, repeatedly press the Up/Down buttons until the
desired input is shown in the LCD. Save the selection by pressing the
Enter button. Press the Esc button to exit Setup mode and return to
normal operation.
Surround Gain
To change surround gain, select
Srnd Gain
and then press the Enter
button.
Figure 6–14 Erasing a Preset
-Setup-
SDI Delay: 140 ms
-Setup-
Srnd Gain -3dB