
821016: AMPx-E8 Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
25
Chapter 2
System Overview
Channel Selection and Mixing
3.
Press the
Input
key until the selected input (SDI1 or SDI2) is
shown in the LCD.
4.
Then press the
Group
button until the pair containing the Dolby
signal is shown in the display (i.e., G1 3/4).
Channel Selection and Mixing
To produce audio through the internal speakers, press each of the
Speaker Assign
buttons (
on page 23
) until each channel is output
through the speaker of your choice. See
Table 2–10
.
Note:
The level meters will operate automatically, displaying
volume levels for each channel carrying an input signal.
Table 2–10
Speaker Assign Button Functionality
Button Press
LED Color
Speaker
1st
Steady Green
Left
2nd
Flashing Green/Amber
Both
3rd
Steady Amber
Right
4th
Off
Neither
AES
Example:
Suppose you are monitoring an AES pair connected to the unbalanced
AES/PCM In 1
. When
AES1
is selected for input, the left channel of
the AES pair will appear on the meter for Channel 1, and the right on
Channel 2. Press the
Speaker Assign
button for Channel 1 until the
Channel LED turns green. Press the
Speaker Assign
button for
Channel 2 until the Channel LED turns amber. The left channel of the
AES pair now sounds in the left speaker, and the right channel in the
right speaker.