821016: AMPx-E8 Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
41
Chapter 3
Audio Configuration
Terminating/Unterminating Inputs
4.
Press the
Up
or the
Down
buttons until the desired input is shown
on the screen.
5.
Press the
Enter
key to change the termination setting for that
input.
6.
To exit the menu, press the
Up
or
Down
arrow buttons until
Save
and Exit
appears in the LCD, as shown in
Figure 3–17
below.
Figure 3–17
Saving and Exiting the Termination
Settings
7.
To exit the
Setup
menu without saving your changes, press
Escape
.
In a system with a Dolby card, the termination selection order is:
•
Unbalanced 1
•
Unbalanced 2
•
Unbalanced 3
•
Unbalanced 4
•
Balanced 1
•
Balanced 2
•
Balanced 3
•
Balanced 4
•
Bitstrm. 1
•
Bitstrm. 2
•
Save and Exit
Important:
Repeat Steps 4 and 5 until all the inputs have been set according to
your needs.
AES Termination
Save and Exit