821016: AMPx-E8 Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
37
Chapter 3
Audio Configuration
SDI Inputs
Press of the
Group
button to cycle through each of the eight choices in
the following order:
•
G1
1/2
•
G1
3/4
•
G2
1/2
•
G2
3/4
•
G3
1/2
•
G3
3/4
•
G4
1/2
•
G4
3/4
Configuring for SDI Delay
Modifying the SDI delay value allows you to precisely synchronize the
audio signal to a video signal.
To change the
SDI Delay
setting:
1.
Hold the
Fn
button while pressing the
Setup
button.
2.
Press the
Down
button until the LCD screens
SDI Delay
as
shown in
Figure 3–11
below.
Figure 3–11
SDI Delay in the Setup Menu
3.
Press the
Enter
button to select the option. The LCD display to an
image similar to that shown in
Figure 3–12
below.
Example:
G1
1/2
will appear on the bottom left hand side of the LCD screen when
the user wants to monitor a bitstream in the first sub-group of Group 1.
This corresponds to Channels 1 and 2 of an ordinary PCM embedded
audio signal. Similarly, G3
3/4
will appear when the user wants to
monitor a bitstream in the second sub-group of Group 3.
Important:
This function only works for SDI signal types.
848131 3.03
Setup: SDI Delay