Page
25
3.
Addr Mode: Pressing this button selects between DHCP and Static address
modes. Note: Switching to a static IP will automatically cancel the direct
connection selection.
4.
Connect: Pressing this button selects between a LAN connection and a Direct
connection. Note: Choosing the direct connection will automatically put the unit
into DHCP mode.
5.
Finished: Pressing this button closes this menu and returns to the Monitoring
Screen.
Important:
If the IP information has been changed, the unit will have to restart. A
warning diamond will display, and you will need to confirm or cancel
before proceeding.
If the information in the IP fields is not correct, the changes made in the
IP fields will be ignored. The IP address is valid if the screen reads “DHCP
Mode Enabled” or “Static IP Mode Enabled.”
Important:
This enables a single-address DHCP server. Thus, when a computer is
connected directly, both the unit and the host computer will be assigned a
DHCP address, and they will be able to communicate. However, this
setting will cause problems with some LANs. If this unit will be connected
to a LAN, leave this setting in the Connect: LAN setting which disables the
internal DHCP server.
