Page
22
Table 3–2: Meter Timings
Ballistics
Rise
Fall
Level Change
Time
VU Not
Specified
IEC Type I
5 ms to reach -2
dB of settled
reading
-20 dB
1.7 sec.
IEC Type II
10 ms to reach -2
dB of settled
reading
-24 dB
2.8 sec
None
Bar or Floating Segment Not Displayed
3.
Bar: Pressing this button and then rotating the Adjust encoder steps
through the available settings for the bar ballistics. Refer to Table 3–1 in this
chapter.
4.
Reference: Pressing this button and then rotating the Adjust encoder
adjusts the reference. Refer to Table 3–1 in this chapter for the reference
standards for each scale.
Note: The AES scale does not allow you to set a reference.
