Page
5
CHAPTER 1: Quick Start
Introduction
Overview
The AMP1-8-M is a 1RU, 8-channel, 3G/HD/SD-SDI audio monitor. This unit comes
with two 2.4” graphics screens that work together to display 8 channels of audio
level metering. You can both visibly and audibly monitor either the first four pairs
(Channels 1 thru 8) or the second four pairs (Channels 9 thru 16) of the selected
3G/HD/SD-SDI input signal. The AMP1-8-M is small, low-cost, reliable and simple to
operate. Configuration is simple and you can easily copy any configuration to other
AMP1-8-M units.
Note that very little configuration should be necessary. We have already configured
the unit to the most commonly requested settings. However, should you need to
change these settings, you can access the unit through the front panel menu
system.
Safety
Instructions
1.
Read, keep, and follow all of these instructions; heed all warnings.
2.
Do not use this equipment near water.
3.
Use only a dry cloth to clean the equipment.
4.
Do not block any ventilation openings.
5.
Do not install near any heat source such as a radiator, heat register, amplifier, or
stove.
6.
Do not attempt to plug the unit into a two-blade outlet (with only two prongs of
equal width).
7.
Protect the power cord from being walked on or pinched, particularly at plug
connections on the equipment and at the socket.
8.
Use only the attachments/accessories specified by the manufacturer.
9.
Unplug the equipment during lightning storms or when unused for long periods
of time.
10. Refer all servicing to qualified service personnel. Servicing will be required
Important:
By design, this monitor will only plug into a three-prong outlet for
your safety. If the plug does not fit into the outlet, contact an
electrician to replace the obsolete outlet.
