WMF 5000S+ User Manual Download

Page: 33 / 120

User Manual WMF 5000 S +

Operation | Manual insert, lockable

3.14 Manual insert, lockable

The manual insert is located in the center of the coffee
machine cover.

Manual insert is used

• When using additional coffee types, such as

decaffeinated coffee

• For coffee sampling
• For inserting cleaning tablets

• Add ground coffee or cleaning tablet only

after the display message.

•  Use only ground coffee in the manual insert.
•  Do not use water-soluble powdered coffee.
•  Do not use coffee that is ground too finely.

Ground coffee prepared using the manual insert

(also possible with 3 receptacles)

Open manual insert lid

Insert ground coffee (maximum 0.67 oz/19 g)

Close manual insert lid

Touch the desired beverage button

Tablet insert

IMPORTANT

Follow the Warranty chapter

starting on page 111

Manual insert

Summary of Contents for 5000S+

























































































































Search results

Summary of Contents for 5000S+

Reviews:

Related manuals for 5000S+

Brands by name

Popular brands

WMF 5000S+, User Manual

Search results

Summary of Contents for 5000S+

Reviews:

Related manuals for 5000S+

Brands by name

Popular brands