WMF 5000S+ User Manual Download

Page: 96 / 120

User Manual WMF 5000 S +

Care | Manual cleaning

Lift bean hoppers out

Completely empty bean hoppers and wipe out
thoroughly with a damp cloth

Allow bean hoppers to dry completely

Refill and replace bean hoppers

Turn the lock on the bean hopper 180° to lock it

5.4.10 Clean the powder hopper

The powder hopper should be cleaned when needed
and at regular intervals.
Recommendation: monthly.
Cleaning will be more frequent depending on powder
consumption.

Slide the operating panel upward

The ON/OFF switch is on the right side, behind the
operating panel.

Press the ON/OFF switch until coffee machine
switches off

Disconnect mains plug

Turn the lock on the powder hopper 180° to open it

Tip hopper backwards and remove upwards

Empty hopper completely

Summary of Contents for 5000S+

























































































































Search results

Summary of Contents for 5000S+

Reviews:

Related manuals for 5000S+

Brands by name

Popular brands

WMF 5000S+, User Manual

Search results

Summary of Contents for 5000S+

Reviews:

Related manuals for 5000S+

Brands by name

Popular brands