WMF 5000S+ Page 88 User Manual Download

Page: 88 / 120

User Manual WMF 5000 S +

Care | Manual cleaning

Replace the filter after 100 brewing cycles/72 hours.

Start the Care menu

Touch

FFC filter change

The display-guided instructions are launched.

Follow the instructions on the display

This menu shows how many more drinks can be
dispensed via this filter and how many hours remain
before filter replacement is due.

5.4 Manual cleaning

5.4.1 Clean the operating panel (CleanLock)

Touch

CleanLock

A 15-second countdown starts.

The touch display can now be cleaned.
The touch display is activated again 15 seconds after
the last time it was touched.

Scalding hazard

• If a beverage is initiated accidentally, there is

a hazard of being injured.

> Always lock out the touch display with

“CleanLock” before cleaning.

• There is a risk of causing scratches or scoring.
> Clean the display with a clean, damp cloth.

Do not use any cleaners or implements.

> Use soft cloths for cleaning.
> We recommend a damp microfiber cloth.

Order numbers for the WMF care
program

Accessories and spare parts

page 116

CAUTION

Follow the Safety chapter

starting on page 5

IMPORTANT

Follow the Warranty chapter

starting on page 111

Summary of Contents for 5000S+

























































































































Search results

Summary of Contents for 5000S+

Reviews:

Related manuals for 5000S+

Brands by name

Popular brands

WMF 5000S+, User Manual

Search results

Summary of Contents for 5000S+

Reviews:

Related manuals for 5000S+

Brands by name

Popular brands