WMF 5000S+ Page 35 User Manual Download

Page: 35 / 120

User Manual WMF 5000 S +

Operation | Drip tray

3.17 Drip tray

Scalding hazard

•  The drip tray may contain hot liquids.
>  Be careful when moving the drip tray.
>  Replace carefully so that no water

accidentally drips down.

3.18 Switch off the coffee machine

Take care to work hygienically

• Germs that are hazardous to health can grow

in the coffee machine.

> Perform daily cleaning before switching off

the coffee machine.

Follow the manual

• If this is not followed, the liability is

invalidated in the event of any resultant
damage.

Slide the operating panel upward

The ON/OFF switch is on the right side, behind the
operating panel.

Press the ON/OFF switch briefly (approx. 1 second)

Coffee machine switches off.

Disconnect mains plug

Turn off main water supply tap

CAUTION

Follow the Safety chapter

starting on page 5

Clean drip tray daily
Care

starting on page 81

CAUTION

Follow the Safety chapter

starting on page 5

Clean the coffee machine as shown
in the manual.
Care

starting on page 81

IMPORTANT

Follow the Warranty chapter

starting on page 111

PIN access control

PIN rights

page 62

Summary of Contents for 5000S+

























































































































Search results

Summary of Contents for 5000S+

Reviews:

Related manuals for 5000S+

Brands by name

Popular brands

WMF 5000S+, User Manual

Search results

Summary of Contents for 5000S+

Reviews:

Related manuals for 5000S+

Brands by name

Popular brands