manualshive.com logo in svg

WMF 5000S+, User Manual

Share
Download
WMF 5000S+ User Manual Download Page 114

114

User Manual WMF 5000 S +

Appendix: Technical data

Installation clearances

For operating, service, and safety reasons the 
machine should be installed with a clearance 
from the building or non-WMF components of 
not less than 1.97 in (50 mm) at the sides and 
1.97 in (50 mm) at the back.
A minimum working space of 31.50 in (800 mm) 
in front the coffee machine and overhead 
clearance of at least 7.87 in (200 mm) above 
the product hoppers are recommended. A clear 
height of 43.31 in (1,100 mm) from the top of 
the supporting surface should be ensured. The 
height of the installation surface above the 
floor is at least 33.47 in (850 mm). If the coffee 
machine connections are to be run downwards 
through the counter, please make space for the 
lines, which can reduce the usable space below 
the machine.

Installation dimensions of the 
water filter

See the User Manual for the water filter.

We reserve the right to make technical modifications.

Summary of Contents for 5000S+

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands