WMF 5000S+ Page 95 User Manual Download

Page: 95 / 120

User Manual WMF 5000 S +

Care | Manual cleaning

5.4.9 Clean the bean hopper

The bean hoppers should be cleaned when needed and
at regular intervals. Recommendation: monthly.

Risk of injury

• Long hair could become caught in the grinder

head and drawn into the coffee machine.

> Always protect hair with a hairnet.

Bruising or crushing hazard /

risk of injury

• The coffee machine contains moving parts

that can cause finger or hand injury.

> Always switch off the coffee machine and

unplug the mains plug before reaching into
the coffee grinder or the opening of the
brewing unit.

> Never clean the bean hoppers in a dishwasher.

Slide the operating panel upward

The ON/OFF switch is on the right side, behind the
operating panel.

Press the ON/OFF switch until coffee machine
switches off

Disconnect mains plug

Turn the lock on the bean hopper 180° to open it

CAUTION

IMPORTANT

Rotate the lock by 180°

Summary of Contents for 5000S+

























































































































Search results

Summary of Contents for 5000S+

Reviews:

Related manuals for 5000S+

Brands by name

Popular brands

WMF 5000S+, User Manual

Search results

Summary of Contents for 5000S+

Reviews:

Related manuals for 5000S+

Brands by name

Popular brands