WMF 5000S+ User Manual Download

Page: 79 / 120

User Manual WMF 5000 S +

Software | USB

4.13 USB

Data exchange is possible via the USB connection.
As long as the USB stick is inserted, the functions will
be active.
The USB connection is at the top left on the reverse
side of the operating panel, behind a cover.

Load recipes

The recipes stored on the USB stick are loaded to the
coffee machine here.

Load beverage symbols

Load photos or beverage symbols from USB stick.

Save recipes

Current recipes are exported from the coffee machine
to the USB stick here.

Save recipes as pdf file

The active recipes, all customer recipes, or all factory
recipes can be exported as PDF files.

Export counters

Current counter levels are exported from the coffee
machine to the USB stick here.

DI_usb

Load recipes

DS_04_13_01

Load beverage symbols

DS_04_13_02

Save recipes

DS_04_13_03

Save recipes as pdf file

DS_04_13_04

Export counters

DS_04_13_05

Summary of Contents for 5000S+

























































































































Search results

Summary of Contents for 5000S+

Reviews:

Related manuals for 5000S+

Brands by name

Popular brands

WMF 5000S+, User Manual

Search results

Summary of Contents for 5000S+

Reviews:

Related manuals for 5000S+

Brands by name

Popular brands